Clear answers before you seal, strip, sand, or restore.

Paver sealing starts at $1.50 per sq ft. Final pricing depends on square footage, access, condition, cleaning needs, stains, joint sand, previous sealer, and whether stripping is needed.

Paver sealing protects a compatible, prepared surface. Paver stripping removes failed, cloudy, peeling, sticky, or incompatible old sealer before the surface can be resealed.

Yes. Paver cleaning is a major part of the result. Dirt, mildew, residue, and buildup should be removed before sealer is applied.

Joint sand is reviewed during the estimate. If the joints are low, washed out, or uneven, paver sanding may be recommended before sealing.

Sealing can enrich and enhance prepared pavers, especially when the surface is clean and compatible. Deep stains, damaged pavers, or failed coating issues may require separate correction.

True Seal serves Spring Hill, Brooksville, Hudson, Trinity, Wesley Chapel, Homosassa, Inverness, The Villages, Tampa Bay, and surrounding Florida communities.

No. It is reserved for failed or incompatible coatings that cannot be safely corrected with cleaning and resealing alone.

It can dramatically improve failed coating issues, but permanent staining, paver damage, or moisture problems may still remain visible.

Often yes, but the surface needs enough dry time and a clean compatibility path before resealing.

Paver stripping and resealing starts at $3 per sq ft. Final pricing depends on failed sealer severity, access, stains, condition, and square footage.

White haze can come from trapped moisture, failed old sealer, residue, product incompatibility, or conditions that prevented proper bonding.

Pressure washing alone usually does not correct failed sealer. The coating problem should be diagnosed before any correction path is chosen.

Sealing protects a prepared surface. Restoration is the broader prep and recovery path when the pavers also need cleaning, sanding, correction, or failed-coating review.

Many stains can be improved, but some deep or long-term stains may remain. The assessment sets expectations before work begins.

Yes. Florida sun, rain, irrigation, and traffic all affect long-term appearance, so maintenance guidance matters.

It can. If joints are low, washed out, or full of weeds, joint sanding may be part of the restoration plan.

Yes. If old sealer is cloudy, peeling, sticky, or incompatible, paver stripping may be recommended before resealing.

True Seal reviews driveways, patios, pool decks, walkways, entries, and other residential paver areas in Spring Hill, Tampa Bay, and surrounding communities.

Often they do. Low or missing joint sand should usually be corrected before sealing.

No exterior service can promise that, but proper cleaning, sanding, and sealing can reduce the conditions weeds exploit.

Yes. Some surfaces need sanding only, while others benefit from sanding plus sealing after the prep is complete.

Rain, pressure washing, drainage, ants, weeds, traffic, and age can all contribute to sand loss.

Optional colored sand can be discussed when it fits the paver color, finish, and project goals.

Sanding can improve joints, but sunken pavers, movement, or structural issues may require a separate repair conversation.

True Seal maintenance plans are 60% of the original job total for areas previously serviced by True Seal Paver Sealing.

The 1-year plan is best for high-traffic or heavy-exposure areas. The 2-year plan is best when the original sealer is still performing well after the first year.

Repairs, major stain removal, heavy weed removal, rust removal, oil removal, drainage issues, and additional square footage may require a separate estimate.

Maintenance pricing applies only to areas previously serviced by True Seal Paver Sealing.

Yes. The maintenance scope includes surface inspection, cleaning, joint sand touch-up as needed, a sealer refresh coat, and final walkthrough.

Additional square footage may require a separate estimate because maintenance pricing is based on the original True Seal job area.

No. Travertine is natural stone and should be evaluated for porosity, moisture, finish, and surface use before sealing.

Often yes, but wet areas need careful finish selection and clear maintenance expectations.

Timing depends on exposure, use, cleaning habits, and product history. A surface review gives the best answer.

Any wet surface can be slip-sensitive. Pool deck use and finish expectations should be discussed before sealing.

The final look depends on the stone, prep, product, and finish. Expectations should be reviewed before work begins.

True Seal reviews travertine pool decks, patios, entries, walkways, and outdoor stone surfaces in Spring Hill, Tampa Bay, and nearby communities.

Not always. Surface condition, prior coating, moisture, cracks, and staining should be reviewed first.

No. Sealer can help protect a prepared surface, but structural cracking or movement needs a separate conversation.

Longevity depends on exposure, traffic, drainage, cleaning habits, and product compatibility.

Yes. Cleaning and prep are important so dirt, mildew, and residue are not trapped under the sealer.

Sealing can help reduce absorption on a prepared surface, but deep oil, rust, irrigation, or organic stains may need separate treatment and may not disappear completely.

True Seal can review driveways, patios, walkways, lanais, pool areas, and outdoor slabs in Spring Hill, Tampa Bay, and surrounding communities.